Part Number Hot Search : 
BST60 SDR1WSMS BR103 SL358N DDL250F 18270452 LT1721 DS1976
Product Description
Full Text Search
 

To Download B-15-155-T3-SSC5-40 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Features * Diplexer Single Mode Single Fiber 1x9 SC Receptacle Connector * Wavelength Tx 1310nm/Rx 1530 nm * SONET OC-3 SDH STM-1 Compliant * Single +5V Power Supply [B-13/15-155-T-SSCx-40] * Single +3.3V Power Supply [B-13/15-155-T3-SSCx-40] * PECL/LVPECL Differential Inputs and Outputs [B-13/15-155-T(3)-SSCx-40] * Wave Solderable and Aqueous Washable * LED Multisourced 1x9 transceiver interchangeable * Class 1 Laser Int. Safety Standard IEC 825 Compliant * Uncooled Laser diode with MQW structure * Complies with Telcordia(Bellcore) GR-468-CORE * RoHS compliance available
Absolute Maximum Rating Parameter Power Supply Voltage Power Supply Voltage Output Current Soldering Temperature Storage Temperature Symbol Vcc Vcc Iout
-
Min. 0 0 -40
Max. 6 3.6 30 260 85
Unit V V mA C C
Note B-13/15-155-T-SSCx-40 B-13/15-155-T3-SSCx-40 10 seconds on leads only
Tstg
Recommended Operating Condition Parameter Power Supply Voltage Power Supply Voltage Operating Temperature (Case) Data Rate Transmitter Specifications Parameter Optical Optical Transmit Power Optical Transmit Power Output center Wavelength Output Spectrumt Width Extinction Ratio Output Eye Optical Rise Time Optical Fall Time Optical Isolation Relative Intensity Noise Total Jitter tr tf
-
Symbol Vcc Vcc Topr -
Min. 4.75 3.1 0 -
Typ. 5 3.3 155
Max. 5.25 3.5 70 -
Unit V V C Mbps
Symbol
Min
Typical
Max
Unit
Notes Output power is coupled into a 9/125 m single mode fiber, B-13/15-155-T(3)-SSC5-40 Output power is coupled into a 9/125 m single mode fiber, B-13/15-155-T(3)-SSC7-40 RMS ()
Po Po ER
-5 -3 1260 10 30 -
1310 -
0 +2 1360 3 2 2 -116 1.2
dBm dBm nm nm dB ns ns dB dB/Hz ns
Compliant with ITU-T recommendation G.957/STM-1 10% to 90% Values 10% to 90% Values Isolation potential between 1480-1580nm at least 30dB Measured with 223-1 PRBS with 72 ones and 72 zeros. LUMNDS1886-Jun0308 Rev A.1
RIN TJ
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Transmitter Specifications Parameter Electrical Power Supply Current Data Input Current-Low Data Input Current-High Differential Input Voltage Data Input Voltage-Low Data Input Voltage-High ICC IIL IIH VIH-VIL VIL-VCC VIH-VCC -350 300 -2.0 -1.1 200 350 -1.58 -0.74 mA A A mV V V These inputs are compatible with 10K, 10KH and 100K ECL and PECL inputs Maximum current is specified at Vcc= Maximum @ maximum temperature Symbol Min Typical Max Unit Notes
Receiver Specifications Parameter Optical Sensitivity Sensitivity Maximum Input Power Signal Detect-Asserted (Note 1) Signal Detect-Asserted (Note 1) Signal Detect-Deasserted (Note 1) Signal Detect-Hysteresis Wavelength of Operation Pin Pa Pa Pd -3 -45 1.0 1480 -33 -35 -33 -35 4.0 1600 dBm dBm dBm dBm dBm dBm dB nm MEasured on transition : low to high, B13/15-155-T3-SSC5-40 MEasured on transition : low to high, B13/15-155-T3-SSC7-40 Measured on transition: high to low Measured with 223-1 PRBS, BER = 10-10, B-13/15-155-T3-SSC5-40 Measured with 223-1 PRBS, BER = 10-10, B-13/15-155-T3-SSC7-40 Symbol Min Typical Max Unit Notes
Note 1: Regardless of whether the Tx is on or not, SD should be asserted at less than -33 or -35 dBm of input power level and deasserted at higher than -45 dBm of input power level from the outside Tx.
Receiver Specifications Parameter Electrical Power Supply Current Data Output Voltage-Low Data Output Voltage-High Signal Detect Output Voltage-Low Signal Detect Output Voltage-High ICC VOL -Vcc VOH- Vcc VSDL-Vcc VSDH- Vcc -2.0 -1.1 -2.0 -1.1 100 -1.58 -0.74 -1.58 -0.74 mA V V V V These outputs are compatible with 10K, 10KH and 100KECL and PECL outputs The current excludes the output load current Symbol Min Typical Max Unit Note
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
2
LUMNDS1886-Jun0308 Rev A.1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Connection Diagram
1. (Rx GND) 2. (Rx +) 3. (Rx-) 4. (SD) 5. (Rx Vcc) 6. (Tx Vcc) 7. (Tx-) 8. (Tx+) 9. (Tx GND)
NC
Top View
NC
Receiver Signal Ground Receiver Data Out Receiver Data Out Bar Signal Detect Receiver Power Supply Transmitter Power Supply Transmitter Data In Bar Transmitter Data in Transmitter Signal Ground
PIN 1 2 3 4 5 6 7 8 Warnings 9
Symbol RxGND RD+ RDSD RxVcc TxVcc TDTD+ TxGND
Notes Directly connect this pin to the receiver ground plane See recommended circuit schematic See recommended circuit schematic Active high on this indicates a received optical signal DC power for the receiver section DC power for the transmitter section See recommended circuit schematic See recommended circuit schematic Directly connect this pin to the transmitter ground plane
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
3
LUMNDS1886-Jun0308 Rev A.1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Recommended Circuit Schematic (3.3V/5V)
B-13/15-155-T(3)-SSCx-40
Tx Vcc
C5
Rx Vcc
9
R1 R3
8
7
65
432
1
R9
R5
R7
C6
TD + TD -
RD + RD -
Tx Vcc Rx Vcc
R2 R4
SD
R10
R6
No internal connection
Transceiver Top view
No internal connection
R8
L1
Vcc
Notes +3.3V: R1=R3=R5=R7=R9=130 R2=R4=R6=R8=R10=82 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H
Notes +5V: R1=R3=R5=R7=R9=82 R2=R4=R6=R8=R10=130 C1=C2=C3=C5=C6=0.1F C4=10F L1=L2=1H
C3
C1
Rx Vcc
L2
C4
C2
Tx Vcc
The split-loaded terminations for ECL signals need to be located at the input of devices receiving those ECL signals. The power supply filtering is required for good EMI performance. Use short tracks from the inductor L1/L2 to the module Rx Vcc. A GND plane under the module is required for good EMI and sensitivity performance.
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
4
LUMNDS1886-Jun0308 Rev A.1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Package Diagram
B-13/15-155-T(3)-SSCx-40
Units in mm
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
5
LUMNDS1886-Jun0308 Rev A.1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Ordering Information
Available Options:
B-13/15-155-T-SSC5-40 B-13/15-155-T3-SSC5-40 B-13/15-155-T-SSC5-40-G5 B-13/15-155-T3-SSC5-40-G5 Part Numbering Definitions:
B-13/15-155-T-SSC7-40 B-13/15-155-T3-SSC7-40 B-13/15-155-T-SSC7-40-G5 B-13/15-155-T3-SSC7-40-G5
B - 13/15 - 155 -
T(3)
- S SC
Tx Power
-40
-RoHS
* Wavelength Tx Wavelength=1310nm Rx Wavelength=1530nm * Communication protocol (155 Mbps) * T = +5V Transceiver * T3 = +3.3V Transceiver * Single mode fiber * Connector options SC * Tx Power 5 = -5 to 0 dBm 3 = -3 to +2 dBm * -40 = 40.3mm Package
* RoHS Blank = RoHS non-compliant product G5 = RoHS 5/6-compliant product (lead exemption)
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
6
LUMNDS1886-Jun0308 Rev A.1
155 Mbps Bi-directional Receptacle Single Fiber Transceiver
B-13/15-155-T(3)-SSCx-40
Warnings
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation.
Legal Noice
IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at LuminentOIC's sole and absolute discretion. LuminentOIC warrants performance of its products to current specifications only in accordance with the company's standard one-year warranty; however, specifications designated as "preliminary" are given to describe components only, and LuminentOIC expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, warranties of merchantability, fitness for a particular purpose, and non-infringement of proprietary rights. Please refer to the company's Terms and Conditions of Sale for further warranty information. LuminentOIC assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and LuminentOIC makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life support applications where malfunction may result in injury or death to persons. LuminentOIC customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify LuminentOIC for any damages resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN "AS IS" BASIS. Customer agrees that LuminentOIC is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly from any use of the information contained in this document. Customer must contact LuminentOIC to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. (c) LuminentOIC, Inc. 2003 All rights reserved
LUMINENTOIC.COM
20550 Nordhoff St. * Chatsworth, CA 91311 * tel: 818.773.9044 * fax: 818.576.9486 9F, No 81, Shui Lee Rd. * Hsinchu, Taiwan, R.O.C. * tel: 886.3.5169222 * fax: 886.3.5169213
7
LUMNDS1886-Jun0308 Rev A.1


▲Up To Search▲   

 
Price & Availability of B-15-155-T3-SSC5-40

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X